B-52 MATRIX 200
Compact, powerful and portable the MATRIX-200 delivers clean, accurate sound ideal for both stage and music playback applications. The MATRIX-200 has a true 200-watt stereo amplifier, built in 5-channel mixer, studio-quality digital effects, phantom power and numerous patch inputs / outputs.
SUGGESTED APPLICATIONS:
- Mobile DJ
- Karaoke
- Nightclub, Restaurant, Bar Install
- Corporate Audio / Video
- Home Entertainment System
- Live Sound System
- Stage Monitoring System
- Booth Monitoring System
Features:
BUILT-IN DSP EFFECTS
- Eight built-in high quality DSP effects
- Level control to mix processed signal with main signal INPUT/MASTER switch to route effects to either Master section or to individual channels
- Powerful routing to combine optional outboard effects with internal DSP effects
24-BIT DIGITAL EFFECTS
The MATRIX-200 includes a 24-bit, 8-position digital effects loop, that allows you to incorporate DSP controlled and digitally generated effects into your mix. Effects offer a wide range of "environments" to
choose from including: Chorus
Chorus/reverb
Slapback
Echo
Large room
Small room
Small hall
Large hall
MATRIX-200 REAR PANEL
Speaker Outputs:
Two full-range outputs of 100 watts each. The outputs are equalized to optimize the acoustic output of the MATRIX-200 satellite speakers.
Subwoofer Output:
Switchable XLR balanced output allows you to add a subwoofer to extend the low frequency output. The sub switch must be in the OFF position if a subwoofer is not used. The switch ON position reduces the low frequency output of the full range stereo outputs.
Headphone:
A 1/4” TRS phone jack stereo output is included for monitoring by headphone.
XLR INPUTS WITH PHANTOM POWER
The XLR microphone inputs are designed for use with
low-impedance |Z| microphones or equipment that has a mic-level balanced output (direct-out). The balanced mic inputs include a 15 Volt DC phantom power source allowing the use of condenser microphones. Dynamic microphones can also be used with these connectors as the 15 Volts DC is too low to disturb their normal operation.
STEREO POWER AMPLIFIER FEATURES
- Output stage with discrete devices, not integrated IC amps
- Output power of 2 x 100w RMS with high headroom
- Comprehensive amplifier and speaker protection circuitry to guard against short circuits, DC offsets, over-heating, turn-on thumps, subsonic and supersonic frequencies.
- Built-in stereo clip limiter
- Equalization customized to enhance and optimize speaker system performance.
- Output for stereo headphones on rear panel
- Very efficient cooling, utilizing a large heatsink and two direct flow fans
- Power supply with low-noise torodial transformer and a dual voltage (115/230Vac) selector switch
LOUDSPEAKERS
- Dual 6.5" drivers optimized for Di'Ippolito configuration (one speaker high, one low)
- 1” exit phenolic tweeter on exponential horn to match acoustic response of 6.5" drivers
FIVE CHANNEL MIXER FEATURES
- Four channels with both balanced XLR mic inputs and unbalanced ¼” jack line level inputs
- * 15Vdc phantom power on balanced XLR inputs
- * for condenser microphones
- * PAN, TONE and EFFECT LEVEL controls on
- * each channel
- One stereo input channel for stereo sources
- * Dual input with ¼” TRS Jack and 3.5mm Jack
- * to connect any 2-channel source
- * Dedicated mono ¼” Jack INSTRUMENT input
- * with frequency response contoured for
- * acoustical instruments
- * PAN/BALANCE, TONE and EFFECT controls
- Low distortion, low noise circuitry
- PLAYBACK input/output RCA connectors with LEVEL control
- PATCH section to connect optional external processors,external effects, and foot switch
- 3-band MASTER EQ section
- XLR subwoofer output and SUB switch on rear panel to connect a powered subwoofer
COMPLETE SYSTEM
Dimensions: 20” (W) x 32“ (H) x 15” (D)
Weight (lbs): 80
Features
- 20w Three Peice Active System - 5-Ch Powered Mixer + 2x Dual 6.5" Two-Way/ With Suitcase
|
