Pioneer DJM-600
The Pioneer DJM-600 is equipped with an industry-first auto beat sampler. The sampler easily and accurately samples phrases in a BPM-linked operation along with an improved auto beat effector. Includes a Sampling rate at 44.1 kHz, 16 bit stereo Resolution, 20 bit A/D converter, and 8 seconds sampling time.
AUTO BPM COUNTER
Equipped with a counter that automatically measures and digitally displays a track's BPM measurement range:
The DJM-600 provides a visual confirmation of a track's tempo to allow the user to merge one song into another smoothly. Also, BPMs of tracks that are difficult to measure can be manually input by tapping on the TAP button.
AUTO BEAT SAMPLER
This is a new DJ function that allows you to sample your favorite sources and play them back easily at the touch of a button. The BPM is measured digitally and recorded automatically exclusively for designated beats
If set to the Stand-By mode when no sound is present, the function automatically starts and stops recording in response to the presence and absence of the input signal and achieves the correct sampling with perfect timing. What's more, the user can edit the end position, making possible a wide diversity of playback effects by making use of three playback mode options and the cross fader start.
THREE SAMPLE PLAY Modes
Single Play, Loop Play, and Stretch Loop Play
AUTO BEAT EFFECTOR
Linked to BPM, the DJM-600 can add effects to each CH, MIC and MASTER independently. The user can produce music that makes full use of high-level DJ techniques by performing quick setting with the Beat Unit Switch button, adjusting the precise time parameters, or controlling the balance between the effect sounds and the original sounds by varying the mix ratio. Moreover, even when using the fader, it is possible to leave just the effect sounds without linking to BPM.
EFFECTS INLUDE
Delay, Echo, Auto Pan, Auto Trans, Auto Filter, Flanger, Reverb, Pitch Shifter, and external effects input.
HEADPHONE MONITOR SPLIT
When the Headphone Output switch is set to MONO SPLIT, the right channel becomes the master and the left channel becomes the CH sound. Choosing Plural with the headphone cue, the user can also hear mixed sound. Moreover, this function can perform right and left level adjustment, thereby making monitoring easier.
FADER START PLAY
Connected to the CDJ Series, the DJM-600 can begin playback of a track using the sliding cross fader or the channel fader. It can mix tracks without creating spaces by setting the stand-by track's cue point and performing a single-action cut-in. Since it returns to the cue point via the back fader alone, sampler-style playback is also possible. Start/back play of sources recorded using the built-in sampler is also possible using the cross fader.
EQUALIZERS
The DJM-600 is equipped with a separate HI/MID/LOW 3-band equalizer for each channel. This arrangement allows the stress of the instrument sounds to be adjusted within the range -26dB to +12dBfor an improvement of about 100% (Pioneer comparison) in sound extraction.
OTHER FUNCTIONS
Cross Fader Curve, Talk Over, Peak Level Meter, Trim, Independant Monitor Switch, and Booth Monitor Output |
