Welcome to Midwest Pro Sound and Lighting

Never before has a fully equipped VCA desk been accessible to so many people. Once again we´ve applied our design skills to making a previously exclusive technology affordable to people on a real world budget.

We´ve also included our unique LCRplus panning system, bringing sophisticated signal imaging within reach for smaller shows. All this power is harnessed in a remarkably compact console which is a real pleasure to drive thanks to its simple, uncluttered control layout.

NEW: There is now a 'B' Option available with first 4 mono channels to the right of the master section replaced with 4 stereo channels

Dual Functionality

GRP/Aux mode switches reverse the group fader and aux rotary master sections to allow you to choose any combination of up to 8 Aux sends and up to 4 audio subgroups on fader masters with inserts and full metering.A Centre Mode switch converts the 100mm C fader to an engineer's listen wedge control with insert

Features:

• Frames Available-24+2, 32+2, 40+2, 48+24
• Audio Groups-Assigned from paired routing buttons and pan from channel. Groups are routed to LCRplus via a single button
• 8 VCA Groups-Using a similar soft-controlled system and the same CPU as the ML4000. Master View button allows checking of selected group assignments. High quality VCA's are fitted to mono and stereo
• input channels-8 Auxiliary Sends 5-8 with faders on masters. 7-8 can be configured as stereo pre/post fade pair for i.e.m. Auxes 1- 4 have rotary masters in Group Mode, and fader masters with inserts in Aux Mode. Auxes have balanced XLR outputs
• LCRplus Panning-Available from channels and groups. Uses blend and pan controls to allow any signal positioning across the C and LR busses
• 8x4 Matrix-Fed from the groups and the LR and C busses. With inserts and external input. Matrix has VU meter access
• 8 Mute Groups-Input channels have soft mutes and are part of the mute grouping and MIDI control. Soft assignment is the same as ML4000
• 4 Band EQ-´Responsive´ feel with separate controls for sweep and cut/boost on mid bands2 Dual Stereo Channels. Additional to the channel count, mixable A&B [TRS] inputs with gain, 4 band EQ and mono summing
• ML Mic Pre with swept HPF-Same extended frequency response through signal path as the ML5000. Swept off - 400Hz HPF. New pot law for smoother gain range with swept HPF
• Balanced XLR plus Inserts-Gold plated XLR connectors. Inserts [TRS] on channels, fader masters, auxes 5-8 and LCR
• PAFL system-PFL overrides AFL. Led status indicators on channels and global status indication on meterbridge
• 128 Snapshot memories-Show automation of VCA assignment / mute ´scenes´ via MIDI/RS232 and ´Archiver´ software
• Talkback-Talk to any of the fader master group/aux and LRC outputs via TB enable switches with led in each section. +48V and trim control for mic
• Engineer´s Toolbox-Phones, wedge and local monitor controls, - 20dB ´dim´ when TB active. Pink noise and oscillator, ground compensated direct outs on channels, 2TRK, LR &C monitor selection with mono check. VU metering has built in peak led. TB/OSC output [TRS]
• Lamps-3 XLR lamp sockets are provided
• Configuration options-Internal jumpers to configure Aux1 to direct out, pre/post direct out, pre/post EQ/pre-insert for the pre-fader source. Isolate pre-fade from channel mute. Pre insert / post fade for 2 track recording source