Welcome to Midwest Pro Sound and Lighting

Power Output:

• 1500W Stereo: 8 Ohms
• 3000W: Stereo 4 Ohms
• 2500W Stereo: 2 Ohms
• 6000W Mono: 8 Ohms
• 5000W Mono: 4 Ohms

Performance

• Minimum Guaranteed Power:
• Frequency Response (at 1 watt,
• 20 Hz - 20 kHz): ±0.25dB.
• Signal to Noise Ratio below rated 8-ohm power, A-weighted:>105 dB

Total Harmonic Distortion (THD)at full rated power: < 0.35%.

• Damping Factor (20 Hz to 100 Hz):> 5000.
• Common Mode Rejection (CMR)(20 Hz to 1 kHz): > 50 dB.
  • DC Output Offset: < 3 mV.
  • A/D, D/A Converters: 24-bit, 96-kHz Cirrus Logic.
  • Digital Input: AES/EBU, 16-24 bit, 32-48 kHz. Onboard sample rate converter. Optional CobraNet input coming soon.
  • Attenuators: Speed sensitive, continuouslyvariable rotary encoder, 0.5 dBsteps, range 0 to -100 dB.
  • Load Impedance (note: Safe with all types of loads): Stereo: 1/2/4/8/16 ohms. Bridge Mono: 2/4/8 ohms.
  • Required AC Mains: Universal AC input, 100-240 VAC, 50/60 Hz (±15%).
  • Maximum AC mains voltage: 277 VAC.
  • AC Line Connector: Five cordsets supplied with amplifier (USA, UK, Europe, Australia, India).
  • Output Connectors: Two high-current, 50A Neutrik® Speakon® NLT4MP (mates with NL4FC or NLT4FX), one per channel. Two pairs of high-current, 60A color-coded 5-way binding posts (for banana plugs, spade lugs or bare wire). Two male XLR passive analog loop through. XLR active/re-clocked AES/EBU digital loop through.
  • Analog Input Connectors: A 3-pin female XLR connector for each channel.
  • Digital Input Connector: A 3-pin female XLR connector that accepts a digital signal in the AES/EBU format.
  • Construction
  • Cooling: Dual-zone, microprocessor-controlled, continuously variables peed, front-to-back airflow.
  • Front Panel: Cast aluminum with integrated handles.
  • Dimensions: 19" (48.3 cm)W x 3.5" (8.9 cm) H x 16.2"(41.1 cm) D.