Home > Live Sound Gear > Amplifiers >

  Crown I-tech 8000
  Crown I-tech 8000
 
Our Price: $7,684.99



Product Code: CROITECH8000


Description
 

Power Output:

  • 2100W Stereo: 8 Ohms
  • 4000W Stereo: 4 Ohms
  • 3500W Stereo: 2 Ohms
  • 8000W Mono: 8 Ohms
  • 7000W Mono: 4 Ohms

Performance

  • Minimum Guaranteed Power: See power grid.
  • Frequency Response (at 1 watt,20 Hz - 20 kHz): ±0.25dB.
  • Signal to Noise Ratio below rated 8-ohm power, A-weighted:>105 dB
  • Total Harmonic Distortion (THD)at full rated power: < 0.35%.
  • Damping Factor (20 Hz to 100 Hz):> 5000.
  • Common Mode Rejection (CMR)(20 Hz to 1 kHz): > 50 dB.
  • DC Output Offset: < 3 mV.
  • Input Impedance (nominal):10 kilohms balanced, 5 kilohms unbalanced.
  • Maximum Input Level: +15dBu or +22 dBu, depending on input sensitivity.
  • Latency (analog, digital inputs):1.05 mS analog, 2.29 mS digital(44.1kHz).
  • A/D, D/A Converters: 24-bit, 96-kHz Cirrus Logic.
  • Digital Input: AES/EBU, 16-24 bit, 32-48 kHz. Onboard sample rate converter. Optional CobraNet input coming soon.
  • Attenuators: Speed sensitive, continuously variable rotary encoder, 0.5 dBsteps, range 0 to -100 dB.
  • Load Impedance(Note: Safe with all types of loads):Stereo: 1/2/4/8/16 ohms.Bridge Mono: 2/4/8 ohms.
  • Required AC Mains: Universal AC input, 100-240 VAC, 50/60 Hz (±15%).
  • Maximum AC mains voltage: 277 VAC.
  • AC Line Connector: Five cordsets supplied with amplifier (USA, UK, Europe, Australia, India).
  • Attenuator: Controls amplifier attenuators in 0.5 dB steps.
  • Output Connectors: Two high-current, 50A Neutrik® Speakon® NLT4MP (mates with NL4FC or NLT4FX), one per channel. Two pairs of high-current, 60A color-coded 5-way binding posts (for banana plugs, spade lugs or bare wire). Two male XLR passive analog loop through. XLR active/re-clocked AES/EBU digital loop through.
  • Analog Input Connectors: A 3-pin female XLR connector for each channel.
  • Digital Input Connector: A 3-pin female XLR connector that accepts a digital signal in the AES/EBU format.
  • Construction
    • Cooling: Dual-zone, microprocessor-controlled, continuously variables peed, front-to-back airflow.
    • Front Panel: Cast aluminum with integrated handles.
    • Dimensions: 19" (48.3 cm)W x 3.5" (8.9 cm) H x 16.2" (41.1 cm) D.
    • Weight: 28 lbs. (12.7 kg) net,36 lbs. (16.3 kg) shipping.
 

Related Products...
Samson SX1200 Power Amplifier
Our Price: $299.00
Add
Samson SX1200 Power Amplifier
QSC PLX3102 Dual Channel Amplifier
Our Price: $1,129.99
Add
QSC PLX3102 Dual Channel Amplifier
Dynacord XA-4000
Our Price: $3,600.00
Add
Dynacord XA-4000
Alto PBM8-250 Powered Box Mixer
Our Price: $359.00
Add
Alto PBM8-250 Powered Box Mixer
QSC PLX2502 Dual Channel Amplifier
Our Price: $1,029.99
Add
QSC PLX2502 Dual Channel Amplifier


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Live Sound Gear > Amplifiers
Live Sound Gear

Midwest Pro Sound & Lighting is proud to bring you the best in DJ Gear, from DJ Audio Equipment like Turntables, Mixers, and CD/HD Players to Lighting, PA's, Speakers, and DJ Equipment Cases. We carry a complete selection of Pro Sound Equipment for Stage and Studio, and all the Pro Lighting and Live Sound Gear you'll ever need for Club, Stage, and Arena setups. And we're Chicago's top choice for PA/Sound System Rental, Lessons (video DJ, DJ, Lighting Engineer, Recording Engineer, Sound Engineer), and Equipment Repair. In addition, we've just added a Professional Recording Studio to our storefront at 1613 W Belmont. Come by and check it out! Chicago's best Pro Sound / Pro Lighting company brings its exceptional knowledge and customer service to the world via www.midweststereo.com. Check us last and you'll buy from us first!