| Array Suspension Kit for JFX-590 These instructions apply to JFX200, JFX260, JFX290, JFX560, and JFX590 loudspeakers. DESCRIPTION The JFX Suspension Kit consists of Fly Clip Rings to support the weight of the loudspeakers and Splay Brackets that set the recomended enclosure splay angle for arraying. WARNING: Only persons with the knowledge of proper hardware and safe rigging techniques should attempt to suspend loudspeakers overhead. Failure to follow this warning may result in damage to the equipment, injury, or death. JFX Series Suspension Kit Parts List: - EAW P/N Qty Description
- 0001386 2 Clip/Fly/Ring ID 1.73
- See Table Below 2 Bracket/Splay
- 104001 2 Eye Bolt/Shoulder 3/8-16
- 102134 4 Bolt/Hex head 3/8-16v
- 105010 4 Washer/Flat 3/8
- 105011 4 Washer/Lock 3/8
- 0005915 1 Instructions/JFX Series Splay Kit
- FLY CLIP
Usage: The weight of each loudspeaker in an array must be supported by its own Fly Clip. The user must provide the connection between each Fly Clip and structure capable of supporting the entire array. Installation: Insert each Fly Clip Ring into an enclosure mounting track. Slide it along the track until locked in place. There are nine possible track positions, each providing a different array down angle. EYE BOLT
Usage: In some cases, a pull-back will be required to set a desired array down angle. For this purpose, use the supplied load-rated Eye Bolts in place of the lower Bracket Bolts. Use a bridle between the Eye Bolts. SPLAY BRACKET
Usage: The supplied pair of Splay Brackets is used to position two adjacent loudspeakers at the recommended splay angle. The brackets are fastened to the threaded holes in the back of the enclosures. WARNING: The Splay Brackets are not load-rated and cannot support the weight of the loudspeakers for either mounting, suspension, or as an array "pull-back". The user must provide other means to support the full weight of each loudspeaker when installed. Bracket Kits: The only difference between Bracket Kits is the actual bracket itself. Each is designed for a specific JFX model (see table below). Using the incorrect bracket will cause performance problems in the acoustical overlap between the loudspeakers. Use the following list to ensure you have the correct Bracket Kit for the JFX model loudspeaker you are using. JFX Bracket P/N Description JFX Bracket Kit P/N Description - 0005355 Bracket/Splay/JFX260 0005911 Bracket Kit/JFX260
- 0005354 Bracket/Splay/JX200 /JFX290 0005912 Bracket Kit/JFX200/JFX290
- 0005356 Bracket/Splay/JFX560 0005913 Bracket Kit/JFX560
- 0005352 Bracket/Splay/JFX590 0005914 Bracket Kit/JFX590
- 0001386 Fly Clip 2X
- 104013 3/8-16 Eye Bolt
|
