Welcome to Midwest Pro Sound and Lighting

The M­Audio EX66 monitor is the culmination of years of research developing cutting­edge high­definition active reference monitor technology. Our midwoofer­tweeter­midwoofer (MTM) design yields a wide sweet spot while minimizing room reflections. The unique low­frequency drivers and custom titanium high­frequency driver deliver exceptional smoothness and transparency across the entire audio band, without resonant peaks­and the drivers are impervious to environmental conditions such as heat, humidity, and sunlight. Onboard DSP handles cabinet resonance tuning and crossover optimization to round out an incredibly accurate frequency response. Digital inputs compatible with up to 24­bit/192kHz signals and high­impedance balanced analog inputs insure that your signal path is entirely pristine. Both the specs and the sound are unrivaled at any price, let alone this value. Sold individually, the M­Audio EX66 represents a new high­resolution standard for both 2­channel and multichannel applications.

Features:

• MTM configuration yields wide sweet spot with reduced room reflections
• two 6­ custom linear­piston woofers deliver high durability with exceptional definition and precision
• 1­ titanium tweeter produces smooth transparency without high­frequency smearing
• bi­amplified with 200 watts PWM power per channel
• DSP­tuned cabinets and crossovers for extremely accurate frequency response with no resonant peaks
• high­impedance analog inputs (XLR and ¼" TRS balanced)
• S/PDIF and AES/EBU digital input up to 24­bit/192kHz for total digital studio connectivity
• 32­bit digital signal processing
• OptImage II high­frequency wave guide minimizes diffraction
• Acoustic Space control optimizes low­frequency response based on room placement
• soft limiter circuit to prevent clipping
• calibrated volume control/input sensitivity control
• high­frequency roll­off/boost switch
• mid­range "presence" switch (low­Q dip or peak)
• low­cutoff switch (37Hz, 80Hz, 100Hz)
• custom­designed MDF cabinet
• internal adiabatic foam absorbs standing waves and enhances low­frequency response and efficiency
• dual flange rear­port design to minimize air turbulence and associated friction noise

Specifications:

• MTM studio reference monitor
• LF Driver:two 6" custom linear­piston woofers
• HF Driver:37Hz ­ 22kHz (­3 dB points) with passband flatness of ±0.5dB from 50Hz ­ 19kHz (near­field acoustic response)
• Crossover:2.56kHz, 4th­order Linkwitz­Riley maximally flat alignment
• LF Amplifier Power:104 watts (IHF dynamic power into 4 O)
• HF Amplifier Power:104 watts (IHF dynamic power into 4 O)
• THD+N:<0.1% (@ 50 watts into 4 O)
• Maximum SPL @ 1 meter:109dB (115dB for a stereo pair) peak
• Analog Inputs:XLR balanced (20k O), ¼" TRS balanced (20k O), sampling of 24 bits at 96kHz, sigma­delta switched­capacitor type
• Digital Inputs:S/PDIF ­ In and Thru (75 O), AES/EBU (110 O), built­in phase lock loop (PLL) to reclock incoming bitstreams with low jitter (<250 psec p­p); S/PDIF receiver can lock to an incoming clock of up to 216kHz
• Controls:Acoustic Space (full, half, quarter); Mid­Range Boost (flat, +2dB); Low Cutoff (37Hz, 80Hz, 100Hz)
• Polarity:positive signal at + input produce outward LF cone displacement
• Input Sensitivity:­10dBV pink noise at input yields 90dB SLP (c­weighted) @ 1 meter; variable
• Protection:RF interference, output current limiting, over temperature, turn­on/off transient, subsonic filter, external mains fuse
• Indicator:power on/off indicator on front panel
• Power Requirements:user selectable for 100V ~50/60Hz, 115V ~50/60Hz and 230V ~50/60Hz
• Cabinet:painted high acoustic efficiency MDF
• Dimension:482.6 mm (H) x 209.6 mm (W) x 241.3 mm(D); 19& (H) x 8.25" (W) x 9.5 inches (D)