Welcome to Midwest Pro Sound and Lighting

Recording engineers and music producers around the world rely on M­Audio reference monitors to insure that their mixes are accurate. The StudioPro 3 active monitors bring that same standard of audio fidelity right to your desktop. Custom­tuned cabinets, optimized speaker design, and advanced crossover technology combine with generous built­in amplification to deliver the best sound you can get in monitors this size. Complete with magnetic shielding to prevent interference with computer and video monitors, StudioPro 3 speakers deliver great audio experiences from your music and multimedia applications. They’re also great for traveling.

Features:

• 3.25" low ­frequency drivers; 1" high ­frequency drivers
• self ­powered
• remarkably accurate frequency response and imaging
• advanced crossover design
• custom ­tuned wood cabinet
• magnetic shielding prevents computer/video monitor interference
• vented port design for added bass
• transportable, compact design is ergonomic and flexible
• internal standing wave acoustic absorption for greater efficiency
• Bass Boost switch
• factory programmed for worldwide use
• RCA rear­panel inputs; convenient front­panel 1/8" inputs
• includes directional stands to optimize listening "sweet spot"

Specifications

• Type:two-­way desktop reference monitor
• LF Driver:3.25­inch diameter, magnetically shielded with curved cone with high­temperature voice coil
• HF Driver:100Hz ­ 20kHz (±3 dB)
• Crossover Frequency:2.3kHz
• Dynamic Range (Maximum Signal­to­Noise Ratio):>80dB (typical, A­weighted)
• Input Connectors: left and right line input connectors (RCA)
• Polarity:positive signal at "+" input produces outward low­frequency cone displacement. Dynamic Power: 10 watts into 4 O (per channel) at 0.5% distortion
• Input Impedance: 10k O (unbalanced)
• Input Sensitivity: 100mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum
• Protection:RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
• Indicator: blue power LED ring around on/off/volume knob on front panel
• Power Requirements: 100­120V~50/60Hz, 220~240V~50/60Hz; powered via detachable 2­conductor line cord
• Cabinet:vinyl­laminated MDF
• Dimensions: 7.9" (H) x 5.5" (W) x 5.9" (D)
• Specifications subject to change without notice